Jib Crane

OZPTU LLC manufactures the following types of jib cranes:

Wall-Mounted Jib Crane: This crane is attached to the building wall and is ideal for confined spaces.
Stationary (Column-Mounted) Jib Crane: This modification features a support column and is used in open areas and large workshops.

Both types of cranes are versatile and suitable for various tasks.

Jib Crane Delivery Set from OZPTU LLC:

Features	Specifications
Lifting Capacity	Up to 10 tons
Lifting Height	Up to 16 m / Up to 32 m
Boom Outreach	Up to 12 m
Boom Rotation Frequency	Up to 0.8 rev/min
Trolley Travel Speed	Up to 20 m/min
Lifting Speed	Up to 8 m/min / Up to 16 m/min
Rope	With polyurethane core
Motor Control System	Frequency regulation on all mechanisms
Temperature Range	Standard temperature -20…+40°C
Color	Customer’s choice
Hook	According to DIN 15401 standard
Type of Lifting Mechanism	Electric hoist
Operating Mode	A1 – A5
Control Options	Radio control, floor pendant, manual drive
Integrated Intelligent Functions	Remote control, parameter logger, weight controller
Installation Location	Indoors or outdoors

Jib Crane Delivery Set from OZPTU LLC:

Electric hoist produced by OZPTU LLC;
Boom (jib) and column;
Boom rotation motor-reducer “BAUER”;
Trolley movement motor-reducer “BAUER” (Germany);
Electrical equipment “Schneider Electric” (France);
Power supply on a rigid profile with flat TKD cable (Germany);
Load limiter produced by OZPTU LLC;
Frequency converters “Danfoss” (Denmark) or customer’s choice;
Control options: radio control, floor pendant control, manual drive;
Two-position limit switches for trolley and boom, adjustable lifting limit switch, light and sound equipment.

Thanks to the use of electrical equipment from such well-known manufacturers as Schneider Electric and Danfoss, we can guarantee not only safety but also high operational performance, which significantly facilitates the work of our clients.
Thanks to quality control at every stage of production, we have achieved high efficiency of our equipment, as confirmed by positive feedback from our customers.
The products of OZPTU LLC fully comply with the requirements of DNAOP 0.00-1.32-01 “Rules for the Arrangement of Electrical Installations. Electrical Equipment for Special Installations”, DSTU EN 60204-1:2019 “Safety of Machinery. Electrical Equipment of Machines. Part 1. General Requirements”, DSTU EN ISO 12100:2016 “Safety of Machinery. General Design Principles. Risk Assessment and Risk Reduction”, DSTU EN 60204-32:2018 “Safety of Machinery. Electrical Equipment of Machines. Part 32. Requirements for Lifting Machines”, as well as EU standards: EN 15011:2020, EN 60204-32:2008, EN 55011:2016/A11:2020, related to CE Directives 2006/42/EC (Machinery Directive) and 2014/30/EC (Electromagnetic Compatibility).
Our products meet the CE and EAC standards.

Order a cost calculation

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Catalogue

Jib Crane

Order a cost calculation

Catalogue